Rev. counter for Otto and Diesel cycle with multiple acquisition modes: via OBD socket and ripple battery, or optional, by inductive clamp and piezoelectric sensor. Engine temperature detection via OBD socket or oil probe. Bluetooth technology and EOBD Scan Tool*.* For the full use of EOBD ScanTool see Kit 3901566
TEXA’s revolutionary RC3 not only keeps engine RPM and temperature under constant control but also serves as an ECU scanning tool. It therefore allows mechanics to perform two types of test using just the one tool.
The RC3 (Revolution Counter 3) interface can read data in three different ways: using an induction clamp with piezoelectric sensors, using a microphone with the residual battery signal, or directly from the OBD socket (on vehicles with the necessary protocol).When plugged into the OBD socket to measure engine RPM and temperature, RC3 reads data directly using EOBD protocol, so there is not even any need to open the bonnet.
RC3 can also be used in scan-tool mode; connected to the EOBD socket, it can read the parameters defined by this standard in accordance with new emission control procedures.
PROCESSOR SYSTEM MB90F591 16MHz SERIAL RESOURCES 1 1.1 USB Connection 1 RS232 standard connection EXTERNAL POWER SUPPLY 8 ÷ 32 Volt WIRELESS CONNECTION 1.2 Bluetooth technology PETROL AND DIESEL DETECTION FROM VEHICLE BATTERY 12VDC and 24VDC Systems management PETROL ANALOGUE DETECTION Amp clamp |
DIESEL ANALOGUE DETECTION Piezoelectric sensor EOBD DETECTION ISO9141-2 ISO14230 SAE J1850 PWM SAE J1850 VPW CAN ISO11898 ENVIRONMENTAL Operating temperature: -5°C ÷ +40°C Operating moisture: 10% ÷ 80% without condensation Storage temperature: -20°C ÷ +60°C DIMENSIONS 155x162x63 mm WEIGHT 800 g. |
İkitelli Osb Mah YTÜ Teknopark Sok Kat:1 No 103, Basaksehir